:  Sep 27, 2007


















.
  : Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.

Raise and support the vehicle.

. LH selector shaft seal only: Remove the exhaust system.


. Remove the transmission heat shield.
  Remove the 4 bolts.




. Release the selector cable and lever.
  Remove the nut.
  Compress the latch and release the cable.




.
  : Before the disconnection or removal of any components, make sure the area around joint faces and connections are clean. Plug any open connections to prevent contamination.

Remove the selector shaft seal.
  Install 307-509-1 to the seal.
  Install 307-509-2 to 307-509-1 and extract the seal.




. :
  Clean the components.

Using 307-509-3, install the selector shaft seal.



. Install the selector cable and bracket.
  Secure with the clip.
  Tighten the nut to 12 Nm (9 lb.ft).

. Install the transmission heat shield.
  Install the bolts.

. LH selector shaft seal only: Install the exhaust system.